18:22:29 up 8 days, 7:19, 2 users, load average: 1.75, 1.90, 1.94
_______ \ \ /==========\ |--LifeTime--| |---19035 ---|) |--up hours--| \==========/ /______/
Apple PowerPC Linux Environmental Monitor version 2.05. Released 4-2015 DoogieLabs.com Latest core temperature statistics: CPU0: 104.5*F | POWER: 12.2W | MIN TEMP: 104.5*F | MAX TEMP: 104.5*F CPU1: 117.7*F | POWER: 17.0W | MIN TEMP: 117.7*F | MAX TEMP: 117.7*F CPU2: 106.0*F | POWER: 12.8W | MIN TEMP: 106.0*F | MAX TEMP: 106.0*F CPU3: 110.6*F | POWER: 16.3W | MIN TEMP: 110.6*F | MAX TEMP: 110.6*F Processor cage fan status: CPU PUMP0: 2496RPM | MIN-RPM: 2496 | MAX-RPM: 2496 CPUINFAN0: 2162RPM | MIN-RPM: 2162 | MAX-RPM: 2162 CPUINFAN1: 2162RPM | MIN-RPM: 2162 | MAX-RPM: 2162 CPUEXFAN0: 2227RPM | MIN-RPM: 2227 | MAX-RPM: 2227 CPUEXFAN1: 2229RPM | MIN-RPM: 2229 | MAX-RPM: 2229 CARDCAGE Thermal Zone: Fan is spinning 1826RPM | FANMIN: 1826RPM | FANMAX: 1826RPM | POWER: 49.6W BACKSIDE Thermal Zone: TEMP: 131.0*F | MINTEMP: 131.0*F | MAXTEMP: 131.0*F Fan is spinning 2853RPM | FANMIN: 2853RPM | FANMAX: 2853RPM DISKBOX Thermal Zone: TEMP: 95.9*F | MINTEMP: 95.9*F | MAXTEMP: 95.9*F Fan is spinning 3667RPM | FANMIN: 3667RPM | FANMAX: 3667RPM
--------------------------------------
Filesystem & RAID Status
--------------------------------------
Filesystem Size Used Avail Use% Mounted on rootfs 118G 64G 48G 58% / udev 10M 0 10M 0% /dev tmpfs 1.6G 2.9M 1.6G 1% /run /dev/disk/by-uuid/8628fd12-e608-4f42-8435-d740c5038b83 118G 64G 48G 58% / tmpfs 5.0M 0 5.0M 0% /run/lock tmpfs 3.1G 72K 3.1G 1% /run/shm /dev/md1 7.2T 1.5T 5.4T 22% /raid /dev/sdg3 7.4G 357M 6.7G 5% /boot tmpfs 7.8G 8.0K 7.8G 1% /tmp /dev/sdi 5.5T 1.1T 4.1T 21% /mnt/usbdisk
Personalities : [raid0] [raid1] [raid6] [raid5] [raid4]
md1 : active raid5 sdf2[0] sdh2[5] sde[4] sdd[3] sdc[2]
7813463296 blocks super 1.2 level 5, 64k chunk, algorithm 2 [5/5] [UUUUU]
md0 : active raid1 sda2[2] sdb2[3]
124969152 blocks super 1.2 [2/2] [UU]
unused devices:
--------------------------------------
Processor and Memory Info
--------------------------------------
processor : 0 cpu : PPC970MP, altivec supported clock : 2500.000000MHz revision : 1.1 (pvr 0044 0101) processor : 1 cpu : PPC970MP, altivec supported clock : 2500.000000MHz revision : 1.1 (pvr 0044 0101) processor : 2 cpu : PPC970MP, altivec supported clock : 2500.000000MHz revision : 1.1 (pvr 0044 0101) processor : 3 cpu : PPC970MP, altivec supported clock : 2500.000000MHz revision : 1.1 (pvr 0044 0101) timebase : 33333333 platform : PowerMac model : PowerMac11,2 machine : PowerMac11,2 motherboard : PowerMac11,2 MacRISC4 Power Macintosh detected as : 337 (PowerMac G5 Dual Core) pmac flags : 00000000 L2 cache : 1024K unified pmac-generation : NewWorld
total used free shared buffers cached Mem: 15G 15G 24M 0B 5.6G 8.8G Swap: 0B 0B 0B Total: 15G 15G 24M
--------------------------------------
Uptime Information
--------------------------------------
# Uptime | System Boot up
----------------------------+---------------------------------------------------
1 203 days, 02:36:25 | Linux 3.2.65doogielabs-c Mon Nov 2 23:56:44 2015
2 128 days, 22:13:26 | Linux 3.2.65doogielabs-c Tue Dec 20 02:06:43 2016
3 106 days, 23:17:19 | Linux 3.2.65doogielabs-c Wed May 25 09:01:50 2016
4 82 days, 10:37:02 | Linux 3.2.65doogielabs-c Fri Sep 9 21:51:52 2016
5 56 days, 00:47:41 | Linux 3.2.65doogielabs-c Sun Aug 16 16:12:03 2015
6 42 days, 14:35:44 | Linux 3.2.65doogielabs-c Sun Jun 7 11:00:10 2015
7 39 days, 08:34:40 | Linux 3.2.65doogielabs-c Thu May 4 02:45:06 2017
8 27 days, 13:45:33 | Linux 3.2.65doogielabs-c Sun May 10 18:48:00 2015
9 22 days, 22:34:41 | Linux 3.2.65doogielabs-c Tue Jul 21 16:11:37 2015
10 18 days, 18:16:55 | Linux 3.2.65doogielabs-c Thu Dec 1 07:31:07 2016
----------------------------+---------------------------------------------------
[1m-> 11 8 days, 07:19:23 [0m|[1m Linux 3.2.65doogielabs-c Tue Jun 20 11:03:07 2017[0m
----------------------------+---------------------------------------------------
1up in 10 days, 10:57:33 | at Sun Jul 9 05:20:01 2017
t10 in 10 days, 10:57:33 | at Sun Jul 9 05:20:01 2017
no1 in 194 days, 19:17:03 | at Tue Jan 9 12:39:31 2018
up 780 days, 00:06:49 | since Mon May 4 02:28:51 2015
down 6 days, 15:46:50 | since Mon May 4 02:28:51 2015
%up 99.154 | since Mon May 4 02:28:51 2015
--------------------------------------
Hard disk SMART Status
***(updates hourly)***
--------------------------------------
----------------------------------------
------------- Boot SSD -----------------
----------------------------------------
smartctl 5.41 2011-06-09 r3365 [ppc64-linux-3.2.65doogielabs-custom-0.8] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Device Model: LEXAR ATA FLASH CARD
Serial Number: 41803434811323121015
Firmware Version: 20120823
User Capacity: 8,002,584,576 bytes [8.00 GB]
Sector Size: 512 bytes logical/physical
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: [No Information Found]
ATA Standard is: [No Information Found]
Local Time is: Wed Jun 28 18:17:01 2017 MDT
SMART support is: Unavailable - device lacks SMART capability.
A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.
----------------------------------------
------------ Primary SSD ---------------
----------------------------------------
smartctl 5.41 2011-06-09 r3365 [ppc64-linux-3.2.65doogielabs-custom-0.8] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Device Model: SAMSUNG MZ7PD128HCFV-000H1
Serial Number: S1MBNSAF814413
LU WWN Device Id: 5 002538 500000000
Firmware Version: DXM01H0Q
User Capacity: 128,035,676,160 bytes [128 GB]
Sector Size: 512 bytes logical/physical
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4c
Local Time is: Wed Jun 28 18:17:01 2017 MDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x02) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (65476) seconds.
Offline data collection
capabilities: (0x53) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 9) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 002 Pre-fail Always - 0
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
9 Power_On_Hours 0x0032 096 096 000 Old_age Always - 19097
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 235
170 Unknown_Attribute 0x0013 100 100 010 Pre-fail Always - 2288
171 Unknown_Attribute 0x0032 100 100 010 Old_age Always - 0
172 Unknown_Attribute 0x0032 100 100 010 Old_age Always - 0
173 Unknown_Attribute 0x0013 067 067 005 Pre-fail Always - 1193
174 Unknown_Attribute 0x0032 099 099 000 Old_age Always - 141
183 Runtime_Bad_Block 0x0032 099 099 001 Old_age Always - 53
184 End-to-End_Error 0x0033 100 100 097 Pre-fail Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 064 051 000 Old_age Always - 36
196 Reallocated_Event_Count 0x0002 253 253 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
255 0 65535 Read_scanning was completed without error
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
----------------------------------------
----------- Secondary SSD --------------
----------------------------------------
smartctl 5.41 2011-06-09 r3365 [ppc64-linux-3.2.65doogielabs-custom-0.8] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Device Model: SAMSUNG MZ7PD128HCFV-000H1
Serial Number: S1MBNSAF825813
LU WWN Device Id: 5 002538 500000000
Firmware Version: DXM01H0Q
User Capacity: 128,035,676,160 bytes [128 GB]
Sector Size: 512 bytes logical/physical
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4c
Local Time is: Wed Jun 28 18:17:01 2017 MDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x02) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (65476) seconds.
Offline data collection
capabilities: (0x53) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 9) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 002 Pre-fail Always - 0
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
9 Power_On_Hours 0x0032 096 096 000 Old_age Always - 19070
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 235
170 Unknown_Attribute 0x0013 100 100 010 Pre-fail Always - 2288
171 Unknown_Attribute 0x0032 100 100 010 Old_age Always - 0
172 Unknown_Attribute 0x0032 100 100 010 Old_age Always - 0
173 Unknown_Attribute 0x0013 066 066 005 Pre-fail Always - 1227
174 Unknown_Attribute 0x0032 099 099 000 Old_age Always - 142
183 Runtime_Bad_Block 0x0032 099 099 001 Old_age Always - 53
184 End-to-End_Error 0x0033 100 100 097 Pre-fail Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 067 056 000 Old_age Always - 33
196 Reallocated_Event_Count 0x0002 253 253 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
255 0 65535 Read_scanning was completed without error
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
----------------------------------------
-------------- RAID HD1 ----------------
----------------------------------------
smartctl 5.41 2011-06-09 r3365 [ppc64-linux-3.2.65doogielabs-custom-0.8] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Device Model: Hitachi HUA723020ALA641
Serial Number: YFG2WD6A
LU WWN Device Id: 5 000cca 223c14f93
Firmware Version: MK7OA840
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Size: 512 bytes logical/physical
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Wed Jun 28 18:17:01 2017 MDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (18784) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 255) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
2 Throughput_Performance 0x0005 134 134 054 Pre-fail Offline - 87
3 Spin_Up_Time 0x0007 100 100 024 Pre-fail Always - 434
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 9
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 133 133 020 Pre-fail Offline - 27
9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 1340
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 9
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 11
193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 11
194 Temperature_Celsius 0x0002 187 187 000 Old_age Always - 32 (Min/Max 25/36)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
----------------------------------------
-------------- RAID HD2 ----------------
----------------------------------------
smartctl 5.41 2011-06-09 r3365 [ppc64-linux-3.2.65doogielabs-custom-0.8] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Device Model: Hitachi HUA723020ALA641
Serial Number: YFG6TJSA
LU WWN Device Id: 5 000cca 223c31659
Firmware Version: MK7OA840
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Size: 512 bytes logical/physical
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Wed Jun 28 18:17:02 2017 MDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (19618) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 255) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
2 Throughput_Performance 0x0005 133 133 054 Pre-fail Offline - 91
3 Spin_Up_Time 0x0007 100 100 024 Pre-fail Always - 427
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 9
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 133 133 020 Pre-fail Offline - 27
9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 1344
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 9
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 12
193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 12
194 Temperature_Celsius 0x0002 200 200 000 Old_age Always - 30 (Min/Max 25/34)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
----------------------------------------
-------------- RAID HD3 ----------------
----------------------------------------
smartctl 5.41 2011-06-09 r3365 [ppc64-linux-3.2.65doogielabs-custom-0.8] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Device Model: Hitachi HUA723020ALA641
Serial Number: YGH94HWG
LU WWN Device Id: 5 000cca 224d23fc8
Firmware Version: MK7OA840
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Size: 512 bytes logical/physical
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Wed Jun 28 18:17:03 2017 MDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (20282) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 255) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
2 Throughput_Performance 0x0005 135 135 054 Pre-fail Offline - 85
3 Spin_Up_Time 0x0007 100 100 024 Pre-fail Always - 424
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 9
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 123 123 020 Pre-fail Offline - 31
9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 1344
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 9
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 12
193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 12
194 Temperature_Celsius 0x0002 200 200 000 Old_age Always - 30 (Min/Max 25/34)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 36230 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
----------------------------------------
-------------- RAID HD4 ----------------
----------------------------------------
smartctl 5.41 2011-06-09 r3365 [ppc64-linux-3.2.65doogielabs-custom-0.8] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Device Model: Hitachi HUA723020ALA641
Serial Number: YFJ073UA
LU WWN Device Id: 5 000cca 223dc49bf
Firmware Version: MK7OA840
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Size: 512 bytes logical/physical
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Wed Jun 28 18:17:05 2017 MDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (19452) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 255) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
2 Throughput_Performance 0x0005 135 135 054 Pre-fail Offline - 85
3 Spin_Up_Time 0x0007 138 138 024 Pre-fail Always - 421 (Average 484)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 158
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 123 123 020 Pre-fail Offline - 31
9 Power_On_Hours 0x0012 098 098 000 Old_age Always - 19024
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 158
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 235
193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 235
194 Temperature_Celsius 0x0002 176 176 000 Old_age Always - 34 (Min/Max 19/41)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 1
SMART Error Log Version: 1
ATA Error Count: 1
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 1 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 8c 3c ac 1d 03 Error: ICRC, ABRT 140 sectors at LBA = 0x031dac3c = 52276284
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
35 00 00 c8 a8 1d e0 00 00:30:15.080 WRITE DMA EXT
35 00 00 c8 a4 1d e0 00 00:30:15.076 WRITE DMA EXT
35 00 00 c8 a0 1d e0 00 00:30:15.072 WRITE DMA EXT
35 00 00 c8 9c 1d e0 00 00:30:15.068 WRITE DMA EXT
35 00 00 c8 98 1d e0 00 00:30:15.063 WRITE DMA EXT
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 110 -
# 2 Extended offline Aborted by host 90% 106 -
# 3 Short offline Completed without error 00% 11664 -
# 4 Short offline Completed without error 00% 11430 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
----------------------------------------
-------------- RAID HD5 ----------------
----------------------------------------
smartctl 5.41 2011-06-09 r3365 [ppc64-linux-3.2.65doogielabs-custom-0.8] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Device Model: Hitachi HUA723020ALA641
Serial Number: YFGTD2HC
LU WWN Device Id: 5 000cca 223cb1641
Firmware Version: MK7OA840
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Size: 512 bytes logical/physical
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Wed Jun 28 18:17:06 2017 MDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (20448) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 255) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
2 Throughput_Performance 0x0005 129 129 054 Pre-fail Offline - 105
3 Spin_Up_Time 0x0007 134 134 024 Pre-fail Always - 433 (Average 498)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 158
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 123 123 020 Pre-fail Offline - 31
9 Power_On_Hours 0x0012 098 098 000 Old_age Always - 19027
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 158
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 232
193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 232
194 Temperature_Celsius 0x0002 171 171 000 Old_age Always - 35 (Min/Max 20/42)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 111 -
# 2 Short offline Completed without error 00% 16655 -
# 3 Short offline Completed without error 00% 16534 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.